Dimmable Magnifier Light - Waldmann MLD

SB0516MLD magnifier with its distortion-free 3.5 diopter lens provides the precise visibility needed for close inspection work. A ring of LED modules with a color rendering index of >80 surround the magnifier, offering glare-free, clear vision capability no matter what the work environment lighting is like. The two-dimensional head joint and convenient dimming function add to user comfort and convenience.

  • 3.5 diopter magnifying lens surrounded by premium LED modules
  • Oversized 6.3-inch diameter lens made from strong PMMA acrylic
  • Lens cover included to keep lens protected from dust, etc. when not in use
  • 5000K color temperature for bright, clear light
  • Strong anodized aluminum double-arm for easy positioning
  • On/off and dimmable capability


Kester RF550 Rework Flux


Kester RF550 is a high-reliability, zero-halogen, no-clean rework flux designed for electronic component rework and repair applications. RF550 has a gel-like consistency and is packaged in syringes for easy dispensing. RF550 can be precisely dispensed onto specific areas that require flux. After being dispensed, RF550 stays in place until soldering occurs. RF550 has excellent performance in applications requiring high reliability. RF550 is the ideal choice for QFP or BGA semi-automated rework applications, and is well suited for use with through-hole repair. RF550 compliments Kester’s high reliability line of products which are formulated to leave safe residues. RF550 is part of Kester’s high reliability product line and compatible with no-clean NP505-HR Solder Paste, NF372-TB Solder Flux and SELECT-10™ Selective Soldering Flux.




Manual rework of BGA, QFP and sockets.

Software-controlled Rework station with camera for repairing medium-sized to small circuit boards.

The Rework station with 2,000 W heating power in IR technology allows uniform heating over an area of 185 x 245 mm² and prevents mechanical stress due to temperature differences during the process. The high-resolution camera delivers fast, accurate and reproducible placement results. Even the smallest components from a size of 1x1 mm2can be repaired and placed. User-friendly handling is provided by the touch-enabled EASYSOLDER 07 software. Reflow profiles with individual temperature parameters can be created, edited and saved and enable high process reliability and repeatable soldering.

The Expert 05.6 IXH is a precise, cost-effective solution for the complete rework process on one unit.


No Compromise – Precision. Performance. Power.

One Weller WX Station. Every Active Tip.

Production within the electronics, medical technology and aerospace industries is moving faster as components become smaller, more complex and more powerful. The soldering industry is no different. In order to meet these increasing demands, we’re expanding our existing RT series.

Weller Tools is committed to offering the widest range of high-performance active soldering tips. For all of your soldering applications, linked to one of our state-of-the-art WX soldering stations.


Compact Fluke PTi120 Pocket Thermal Camera

The power of a professional-grade thermal imager that fits in your pocket

  • Touchscreen IR Fusion that automatically captures a digital visible light image simultaneously with an infrared image to locate problems easily.
  • 3.5” LCD touchscreen display for easy troubleshooting.
  • Fully radiometric Thermal Imager gives you measurement data to the pixel with 120 x 90 infrared resolution (10,800 pixels)
  • IP54 enclosure rating, it stands up to dirt, water and can withstand drop up to 1 meter.



Siglent SDL1000X Series Programmable DC Electronic Load

  • SDL1020X (Single channel ): DC 150 V/30 A, total power up to 200 W
  • SDL1030X (Single channel ): DC 150 V/30 A, total power up to 300 W
  • 4 static modes / Dynamic mode: CC/CV/CR/CP
  • Min. readback resolution: 0.1 mV, 0.1 mA
  • Adjustable current rise time range: 0.001 A/us~2.5 A/us

SDL1000X/SDL1000X-E series Programmable DC Electronic Load has a 3.5 inch TFT-LCD display, a user-friendly interface and superb performance specifications.


Waldmann WLA Task & Work Bench Lighting

WLA LED mounted workstation system light is an ideal solution for manufacturing, assembly or quality control procedures, and metalworking environments - any area where quality lighting is essential. Three lengths allow for matching the light to the workbench to obtain the broadest light source possible.

The strong anodized aluminum housing and sealed construction protect the inner workings from environmental dust, etc. from entering the fixture. 5000K color temperature with CRI>80 offer bright, glare-free light for visual clarity. All models are designed for thru-wire capability.


GW Instek GPM-8213 Power Meter

GW Instek GPM-8213 power meter is designed specifically for single-phase (1P/2W) AC power supply’s power measurements. Powerful features, including 4” TFT LCD, five-digit measurement display, 19 power measurement parameters, integral measurement function, high-accuracy voltage/current/power measurement capabilities, front/rear panel input terminals, and various communications ports, are to facilitate users with clear, convenient, and accurate power measurements.


Rework Station EXPERT 10.6

martin expert wbs

CCD-camera supported rework of BGA, CSP, QFN

The Expert 10.6 rework stations facilitate the reliable and precise rework of BGA-, CSP-, and QFN-components, connectors and sockets. Innovative technologies such as “Advanced Vision Placement”, Hybrid Heating Technology and the intuitively operated “Easy Solder” software ensure safe soldering and de-soldering without the intervention of operators in the soldering process.



LPKF ProtoLaser U4

LPKF ProtoLaser wbs

Structuring of finest conductive path patterns

– Benchmark for printed circuit board processing

– Simple, fast, precise

– Different laser wavelengths and pulse frequencies

– Intuitive CircuitPro system software



SIGLENT SDS1000X-E Series Super Phosphor Oscilloscopes

Siglent SDS1202X E 1 wbs

  • 100 and 200 MHz bandwidth models
  • 2 or 4 analog channels, 16 logic/MSO optional on 4 channel only
  • Real-time sampling rate up to 1 GSa/s
  • Math co-processor speeds front panel operation
  • Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)
  • Record length up to 14 Mpts, 1 Mpt FFT
  • On-screen Bode plot and web-browser control (standard on 4 channel only)
  • WiFi control (optional on 4 channel only)



Waldmann TEVISIO - No. 1 for mobility & visual quality

waldmann tevisio wbs

TEVISIO supports demanding viewing tasks with ergonomic perfection. Whether in the electronic, metal or watch sector, whether in assembly, workshop or inspection: TEVISIO is essential wherever demands on viewing are highest.

With its highly developed LED technology, innovative arm technology and a field of vision ideally matched to the distance to the eye, the TEVISIO magnifier luminaire offers optimum efficiency and ergonomics at the workplace.



Dino-Lite High-Speed Digital Microscope

dino lite wbsdino lite statief wbs

For working in environments where you do not want to use a computer, or when a real-time video stream is required, a Dino-Lite with DVI, VGA or direct TV connection might be the best solution.

The Dino-lite series with a VGA connector can be plugged directly into a computer monitor (VGA screen) and the DVI and TV models can be connected directly to the TV screen.